In winding machine repair, used a intact spare parts replace the suspected faulty parts, after repair personnel judge fault reason  , this method can be used to quickly diagnose the fault ,Winder quickly put into normal operation, then the bad parts returned for repair, which is the most common troubleshooting approach in currently.

As tension winding machine, the screen voltage, winder racks adjustable starting position adjustment member and so on, in the repairing is an simple but effective approach. By adjusting the adjustable parts, fix some innocuous failures. Such as an enterprise repair winding machine which used for many years, the system displays the screen dark, after the supply voltage by adjusting the screen to normal.

For some very strange fault, use the exclude replacement method could not find a reason, often need to start from the surrounding environment, the environment is generally divided into two types, power and space. Improvements can be regulated, isolated power supply from the power source to improve fluctuations, for some high-frequency interference from the power supply capacitor filter method can be used by these preventive measures to reduce failures caused that the power increase and check ground whether well is also necessary. There are so many reason of the spatial interference, dust, gas, etc., the foundation superficial, vibration, space radiation interference and so on, and so forth, you need experienced repair technicians and specialized equipment to detect and maintain.

According to the actual work of the winding machine and conventional fault records can be found occasional failures which due to the winding machine design or production process defects caused ,can through constantly modify and improve the system software or hardware to solve. These changes are used the maintenance in the form of information supply to the maintenance staff constantly .Through these customer feedback, the company may use this as a basis for troubleshooting, accurate, thorough eradication failure, a reasonable user feedback also continue to improve our strong boost.

In short, winding machine repair first - step is according to symptoms, determine the real cause of the fault and the fault location as soon as possible, these troubleshooting methods, there is no strict boundaries in actual using, sometimes just a way to be able to exclude failure, a variety of methods may be required simultaneously. Its effect depends on the experience of maintenance technicians of their own acknowledge and grasp the depth for the system principle and structure It is the quality both maintenance personnel must have , but also made high demands for maintenance staff , which requires NC Winder maintenance personnel familiar with the structure and design ideas Winder, familiar performance CNC routing machines only Thus, in order to quickly identify the cause of the fault, determine the fault location, in addition, in order to repair some circuits and parts for site mapping, as a senior maintenance staff should also have the ability to draw certain engineering drawings.

Previous：Winder NC evident

Next：How to maximize the power of Winder