Localtion: HOME > News >


How to correctly set the parameters of the transformer winding machine

Winding machine can work correctly plays a key role in transformer winding machine is different from the

 other winding machine is special equipment operation, the production process of transformer determines

the frequent starting equipment and constant torque requirements, general transformer winding machine

parameters need to set: circle the number set is the equipment according to the number of ring production

 process needs to run, it is divided into the total number of coils and respectively corresponding to each

step number, setting is that a circle should sum is equal to the number of each step cycle number; idle

function setting is a commonly used parameter which is mainly control equipment start-up and stop slow

running up to the soft start and stop buffer, the correct configuration allows workers to operate at the start

 of a winding machine to pull the process, when the device with buffer parking can park more accurate;

Speed control device for running speed, speed setting need to decide according to the production

technology and the actual condition of the winding, too fast and too slow is not conducive to the coil

 forming, fast operation will not be conducive to the control of the operating personnel, increase the

vibration and the noise of the equipment, the operation is too low will greatly affect the equipment the

 capacity and efficiency of equipment will also affect the output torque of the main shaft; step by step

sequence function is used to control the operation of equipment order, it is generally determined

 according to the production process, forming a coil winding is not only winding enameled wire, there

are many other steps such as wrapping layer, insulation

Cloth and so on, so the correct setting of the step sequence function will effectively play the efficiency

of the equipment.

This article is reprinted from the network.
ZhongShan ShiLi  Wire Winder Equipments Co.,Ltd tel: 0760-22601408. Professional

production and sales stranding machine, winding machine|automatic winding machine|full

automatic winding machine| transformer winding machines| motor Winding machine|coil

winding machines| heating wire winding machines| wire winding machines| high-frequency

transformer winding machine|motor winding machine| a single spindlewinding machines| 

multi-axis winding machine|solenoid valves Winder|High-speed winding machine and non

-standard equipment. URL: www.zsshili.com.

Sina Weibohttp://weibo.com/zsshili/home?topnav=1&wvr=6