Localtion: HOME > News >

 

| Automatic winding machine | use process skills


Automatic winding machine operation is not difficult, mainly on unfamiliar winding machine, the company has no professional training in it, but then we are here to tell you, I believe that people do not understand just click methods to manipulate will understand. During operation, automatic winding machine, be sure to know how to set a good starting position around, wire size, wire winding width three important parameters.

Specific methods are as follows:

First, since the winding position setting

What is the play about the position? Simply means that the starting point for the beginning of the winding skeleton, with the head and the position of the coil type coils have close ties around specific values related to starting position usually comes through the plant control system to measure the measurement function; operation staff can also be used manually measured at fixed points as the attention when the coil reference point scale with actual measurements, set the winding direction of the point.

Second, the specifications set enameled

We often have a different diameter enameled wire, enameled specifications set correctly will directly affect the effectiveness cable, the use of different materials need to add a different diameter enameled correction value, thin copper wire is not easy to be pulled, the correction value plus 0.02, aluminum can easily be stretched in tension after winding equipment and over the line device, the correction is allowed between the value of a significant reduction 0.02-0.2.

Third, the winding width settings

Winding Width understanding is from the start position to the winding position of the distance between the winding end, this value directly reflects the skeleton usually requires winding length, the need to consider the use of a slight deformation of the skeleton of the wire width will be set when the impact of the method should be used as an integrated measure of taking the minimum wire width. After know how to set the parameters of the above automatic winding machine, I believe we operate, we can handy.




This article is reprinted from the network.


Zhongshan shili winder equipments coi.,ltd tel: 0760-22601408. Professional production and sales stranding

machine, winding machine, automatic winding machine, full automatic winding machine, transformer

winding machines, motor Winding machine, coil winding machines, heating wire winding machines, wire

winding machines, high-frequency transformer winding machine, motor winding machine, a single spin-

dlewinding machines, multi-axis winding machine, solenoid valves Winder, High-speed winding machine

and non-standard equipment. URL: www.zsshili.com.

 


 


 
Elaine:
  elainewong2009:
HOT SERVICE
+86-760-22601408