Overall reset method under normal circumstances winding machine due to the overall error caused by transient faults, hardware reset or switch power supply system in order to clear the fault, if the system working memory area due to voltage instability, plug line board or rectifier switching power supply owe pressure cause confusion must be the system initialization clearance, pay attention to do a good job in the current backup data records should be removed before, if the reset initialization still cannot eliminate malfunction, hardware replacement diagnosis.

The establishment of a reasonable procedure and running successfully is the basis for determining the function of the winding machine system. Some errors may cause the system to malfunction or invalid.

System test run program to check, correct user program error, in order to ensure its normal operation.

To improve the environmental quality of the law for some very strange fault, with the exclusion of alternative methods can not find a reason, often need to start from the surrounding environment, the environment is generally divided into two kinds, power and space. Power supply improvement can be used to improve the power supply of the power supply, for some of the high frequency interference from the power supply can be used to filter method, through these preventive measures to reduce the fault caused by power, increase and check the grounding is also very necessary. Spatial interference for many reasons, dust, gas, foundation of vain, vibration, space radiation interference variously, CNC winding machine line requires experienced technicians and professional equipment to detect and preserve.

The fault classification of the winding machine is: electrical, mechanical, transmission, pneumatic (if any), which is divided into strong and weak electricity, and winding machine manufacturers generally in the design, use and maintenance of its CNC system, the fault location to give the alarm, the alarm circuit, on the one hand, in the display or operation panel, light and other information.

Previous：Industry researcher specific analysis of CNC winding machine precise positionin

Next：The following principles should be grasped in the fault diagnosis of CNC winding